Hybrid Wet-Dry Closed Circuit Cooling Towers
Product Category:
Product Performance：
High capacity per cell, up to：500m³/h-2500m³/h Low water evaporation loss, annual water saving rate：30%-85%Keywords:
Hybrid Wet-Dry Closed Circuit Cooling Towers
Product Introduction
Operating Principle
Hybrid Operation Mode：Circulating water first flows through the air cooling section. Driven by fans, ambient air flows across the finned heat exchange tubes to pre-cool the water. The pre-cooled circulating water then enters the evaporative cooling tube bundles, where it fully exchanges heat with cross-flowing air and spraying water outside the tubes to achieve deep cooling.
Dry Operation Mode：When ambient temperature falls below design operating conditions, close the air dampers of the evaporative section, open those of the air cooling section, and shut down the spray system. The air cooling section alone can meet the process cooling requirements of the circulating water.
Wet Operation Mode：Under high-temperature summer conditions, close the air dampers of the air cooling section, open those of the evaporative section, and activate the spraying system simultaneously. The circulating water inside the tubes is cooled via evaporative heat transfer by the combined effect of cross-flowing air and spraying water outside the tubes.
Product Advantages
Business Consultation
If you are interested in our products, please leave your email address, and we will contact you as soon as possible. Thank you!
Address: No. 99 Hengshan Street, Xin’an Zone, Anqiu City, Shandong Province, China